NETWORK ADMINISTRATION

Enquire, Join and get training by Well Experienced & Certified tutors
for your professional IT Course.

Watch Sample Session!

Get in Touch

+1 202-403-9022

+91 951 583 9400

info@suvenit.com

MODULE#1 –Introduction to storage fundamentals
• Introduction to Networking
• Introduction to Local Area Networks
• Introduction to Wide Area Networks
• Introduction to TCP/IP
• Introduction to Telecommunications
• Internetworking Devices
• Internet Technologies
• Convergence of Technologies
• Implementation of Data Networks
• Design and Implementation of Voice Networks
• Protocols AnalysisMODULE#2 –Operation of IP Data Networks
• Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs.
• Select the components required to meet a given network specification.
• Identify common applications and their impact on the network
• Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models.
• Predict the data flow between two hosts across a network.
• Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN

MODULE#3 –LAN Switching Technologies
• Determine the technology and media access control method for Ethernet networks
• Identify basic switching concepts and the operation of Cisco switches.
• Collision Domains & Broadcast Domains
• Types of switching
• Configure and verify initial switch configuration including remote access management.
• Cisco IOS commands to perform basic switch setup
• Verify network status and switch operation using basic utilities such as ping, telnet and ssh.
• Identify enhanced switching technologies
• RSTP & PVSTP
• Ether channels
• Describe how VLANs create logically separate networks and the need for routing between them.
• Explain network segmentation and basic traffic management concepts
• Configure and verify VLANs
• Configure and verify trunking on Cisco switches
• Auto negotiation
• Configure and verify PVSTP operation
• describe root bridge election

MODULE#4 –IP addressing (IPv4 / IPv6)
• Describe the operation and necessity of using private and public IP addresses for IPv4 addressing
• Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment.
• Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.
• Describe the technological requirements for running IPv6 in conjunction with IPv4 such as dual stack
• Describe IPv6 addresses
• Global unicast & Multicast
• Link local & Unique local
• autoconfiguration

MODULE#5 –IP Routing Technologies
• Describe basic routing concepts
• Packet forwarding
• Router lookup process
• Describe the boot process of Cisco IOS routers
• Router POST & router bootup process
• Configure and verify utilizing the CLI to set basic Router configuration
• Cisco IOS commands to perform basic router setup
• Configure and verify operation status of a device interface, both serial and ethernet
• Verify router configuration and network connectivity
• Cisco IOS commands to review basic router information and network connectivity
• Configure and verify routing configuration for a static or default route given specific routing requirements
• Manage Cisco IOS Files
• Boot preferences
• Cisco IOS image(s)
• Managing Licensing

MODULE#6 –Routing and routing protocols
• Static vs. Dynamic
• Link state vs. Distance Vector
• Administrative distance
• split horizon
• metric & next hop
• ip routing table
• Passive Interfaces

MODULE#7 –OSPF
• Configure and verify OSPF (single area)
• Benefit of single area
• neighbor adjacencies
• OSPF states
• Discuss Multi area
• Configure OSPF v2
• Configure OSPF v3
• Router ID & Passive interface
• LSA types

MODULE#8 –Configure and verify EIGRP (single AS)
• Feasible Distance / Feasible Successors /Administrative distance
• Feasibility condition
• Metric composition
• Router ID
• Auto summary
• Path selection
• Load balancing
• Equal & Unequal
• Passive interfaceMODULE#9 –Configure and verify inter-VLAN routing
• sub interfaces
• upstream routing
• encapsulation
• Configure SVI interfaces

MODULE#10 –IP Services
• Configure and verify DHCP (IOS Router)
• configuring router interfaces to use DHCP
• DHCP options
• excluded addresses & lease time

MODULE#11 –Describe the types, features, and applications of ACLs
• Configure and verify ACLs in a network environment
• Standard, Sequence numbers
• Editing & Extended
• Named & Numbered
• Log option

MODULE#12 –Identify the basic operation of NAT
• Pool & Static
• Overloading
• Source addressing
• One way NAT
• Configure and verify NAT for given network requirements
• Configure and verify NTP as a client

MODULE#13 –Recognize High availability (FHRP)
• VRRP, HSRP & GLBP
• Configure and verify Syslog
• Utilize Syslog Output
• Describe SNMP v2 & v3

MODULE#14 –Network Device Security
• Configure and verify network device security features such as
• Device password security
• Enable secret vs enable
• Transport
• Disable telnet
• SSH & VTYs
• Physical security
• Service password
• Describe external authentication methods
• Configure and verify Switch Port Security features such as
• Sticky MAC & MAC address limitation
• Static / dynamic
• Violation modes
• Err disable
• Shutdown, Shutdown unused ports
• Protect restrict
• Assign unused ports to an unused VLAN
• Configure and verify an ACLs to limit telnet and SSH access to the router
• Err disable recovery

Quick Contact
close slider